铝型材数显双头精密切割锯LJB₂S-500×4200

Precision Digital Display Double-head Cutting Saw for Aluminum Profile LJB₂S-500×4200

◆锯片主轴采用高精密主轴，专用进口硬质合金锯片
◆装有数显装置定位精度高。
◆切割进给运动与机头的左右移动导轨，均采用进口直线轴承运动副
◆锯片进给由液压阻尼气缸提供动力
◆加工范围大，切割长度达4200mm，切割角度为90°、45°、22.5°，三种角度按钮自动转换
◆后托料架随活动机头的运动场自动伸缩
◆安全罩随锯片的进、退自动起落，安全性好
◆气控阀控制摆角气缸，避免电磁阀长期带电引起失效
　　The main axle of the saw is made precisely highly , and is specialized for the hard alloy saw. The digital display device makes the relocation precision high. The feeding of saw blades and the movable of machine heads are also made by the liner bearing pairs. The moving of the saw is motivated by the hydraulic damper cylinder. The processing range is very large, and the cutting length can arrive 4200mm, the cutting angles are 90, 45 and 22.5. They can change into another automatically. The material support can go and back automatically with the heads of the machine. The safety precaution can up and down with the saw safely. The air valves control the corner cylinder, avoiding the electricity of the machine.